blog-top-background

The Exilva Blog

The leading blog on nanocellulose

Coatings, adhesives/sealants

A way to reach prolonged stability of starch adhesives

10. March 2020

Starch is a natural polymer found in many processes either as an adhesive or a thickener. Following paper production, corrugated board is the second largest application of non-food starches globally, where it it used as an adhesive between the fluting and liners. The control of the adhesive viscosity during process and storage is critical. However, despite further developments regarding the formulation of starch adhesives, the viscosity is commonly not stable enough over extended periods of time, in particular over weekend storage. In this first of a series of blog posts with the corrugated boards application as the example, I will give an introduction to this problem, and the new technology of Exilva, a microfibrillated cellulose, to solve it.

Read more
27. November 2018

[RESEARCH REVIEW] New materials are emerging; can they shift current technologies?

The technology of cellulose fibrils/nanocellulose is breaking new grounds, and my research review this week is focusing on materials development. So if you are wondering how new increasingly sustainable nanocellulose/thermoplastic solutions are looking, you should not miss out on this week’s research review!

Read more
20. November 2018

[VIDEO] Topic Tuesday: Lime mortar can better compete with concrete, with new rheology additives available

Lime, consisting of air lime and hydraulic lime, is one of the most important historical construction materials. Due to new plasticizer technologies available, we are now seeing a new golden era approaching for this material? Don't miss out on this Topic Tuesday subject that can give you insights into improving lime mortar formulations which can outcompete concrete materials by enhancing workability and appearance.

Read more
13. November 2018

Important rheological properties of Exilva microfibrillated cellulose

Rheology is the study of deformation and flow of material under stress, for example how easily material changes its form when it is pressed, or how easy it is to pump liquid in the pipes. Yield stress and viscosity are two importance aspects in the study of rheology and I will today exemplify this by using the Exilva microfibrillated technology. 

Read more
6. November 2018

[VIDEO] Topic Tuesday: Can I create safer and better performing batteries by using stronger and thinner films?

Trends are clear; today's technology demands expect smaller and lighter devices, while at the same time the need for digital speed, pace and stamina is a potential deal breaker. How do you cope with this when developing tomorrows technology? In today's Topic Tuesday we serve you some interesting thoughts on how to keep your batteries safer, so you can focus on staying in front in the ongoing development marathon.

Read more
30. October 2018

How can i control the rheology of my concrete better?

Concrete products are a complex mixture of chemicals, fines, and heavy particles. It's always challenging to control the stability, flow and strength of it. Many admixtures have been created to overcome these challenges, often containing synthetically derived performance additives. I will here try to give you some input of one of the new technologies and how it affects various parameters in the concrete.

Read more
23. October 2018

How to compare rheology additives: The example of nanocellulose/cellulose fibrils and HASE

For decades, producers of fluid materials have used HASE as the fundamental technology to control flow. How can new technologies complement this work horse of rheology modification? This week I am trying to uncover the key aspects of the HASE technology and give you ideas on the HASE technology in relation to the world I am familiar with: nanocellulose and cellulose fibrils. 

Read more
16. October 2018

How to compare rheology additives: the example of nanocellulose/Cellulose fibrils and HEUR

As a researcher, to have an overview of the alternatives available in your area of profession is of importance. In the landscape of rheology, new alternatives are emerging. In my short review today, I will grasp on the subject of similarities and potential synergies between two of the candidates you should note down: nanocellulose and hydrophobically modified ethoxylated polyurethanes (HEUR). Here are my hints and tips  on how to understand these two technologies better.

Read more
9. October 2018

[VIDEO] Topic tuesday: Sag vs. leveling. Can you handle 'em both?

A fast viscosity recovery is good, and some times crucial, but that would also affect the leveling, right? In this weeks Topic Tuesday, we discuss how you can cope with the issue of getting fast recovery - and avoid sag - while getting your coating layer in level. We may also have some exciting ideas for you if you have problems with cracking. 

Read more
2. October 2018

High performance and durability with greener tire tread

There is a growing interest to increase the portion of bio-based components in various consumables. We have previously discussed about the challenges to incorporate microfibrillated cellulose (MFC) into composite materials with hydrophobic matrixes, such as PLA. Today we will take a step even further and see how cellulose fibrils can support the development of more environmentally friendly tires with high performance and durability.

Read more
25. September 2018

[VIDEO] Topic Tuesday: You need to change the way you think!

Suddenly, the new tax on pollutants in China, their ban on solvent based coatings for containers, and the city of Shanghais ban on solvent based coatings for exterior walls and wood ware has changed things. Do you want to know more on how to adapt in rapid market changes like these? In this topic Tuesday we are discussing this and showing you a couple of concrete examples to get your ideas start running. Don´t miss out on this weeks interesting discussion on saving business with the necessary level of innovation.

Read more

Never miss out

Sign up to our blog for all the latest