The leading blog on nanocellulose
Paint manufacturers have been formulating paints containing microspheres in many years. Formulators can use microspheres to increase the solid content of a coating while maintaining the proper application and flow characteristics. Higher solids can reduce volatile organic compounds (VOCs), shrinkage and drying time. But there can be problems with settling and sedimentation, as well as floating of the microspheres. In addition, cost of certain types of microspheres can be high. In this article I will show you how the microfibrillated cellulose technology can give anti-settling and anti-sedimentation of microspheres, as well as enabling you to choose less expensive microspheres and obtain the same performance, which typically has been associated with more expensive types.Read more
Cellulose-based materials, like paper and board, are commonly used in packaging. They are light-weight, durable, bio-based and easily recyclable which have made them a popular packaging material. However, paper and board lack the necessary barrier properties for food packaging and therefore an additional barrier layer is often added on the paper. Today, this layer is made from polymers, like polyethylene terephthalate or polyethylene, or aluminum. There are efforts to replace these materials with bio-based, biodegradable films in order to reduce the dependency on crude oil as well as reduce the impact on the environment.
Controlling rheology in very acidic or alkaline environments can be a tricky challenge. Different products ranging from examples like concrete to, your household cleaning products, are very different on pH. Extreme pH conditions can decrease the efficiency and functionality of some rheology additives, but there are some available alternatives. This post will try to give you some ideas on how the technology of cellulose fibrils can interact in your formulation and make sure you stay in control over your product´s rheology under difficult circumstances. And why is this ability from the cellulose giving you this benefit?
Printed electronics suit well for the current mega trends, like internet of things and growing interest in monitoring your own health. The products produced by printed electronics vary from displays and sensors to energy storage and flexible conductors. For example, small sensors can be printed on food packaging to follow the quality of food as well as warn the consumer when the product is out of date. For such reasons, the interest for developing materials for printed electronics is growing. How can cellulose fibrils and other cellulose based materials be used in such applications?
Is microfibrillated cellulose (MFC) the same as nanocellulose? What is the difference between micro- and nanofibrillated cellulose? What about cellulose nanocrystals and cellulose fibrils? Starting to read about MFC (or nanocellulose) might be confusing since the terms used for nano- and micro-sized cellulosic materials are versatile. Moreover, they are not totally established, so the same material can have different names or the same terms can be used for very different kind of materials. In this post, I will introduce the most common terms and distinguish synonyms from different materials.
Dust originating from abrasion of dry materials can cause a danger to the health and environment. One of the industries that is paying a lot of attention to dust control is the seed treatment industry. Seed treatments are an essential part of today’s agriculture and it means applying the crop protections products, like insecticides and fungicides, directly on the seeds before planting. This is regarded as an effective way to apply the crop protection products and can reduce the needed amount of the products in total. However, the applied substances can start wearing off from the seeds when they are transported and handled which can cause unhealthy dust.
Typically, when using polymeric rheology modifiers, the viscosity of a formulation decreases with increasing temperature and the polymers can even degrade at higher temperatures. This can cause problems for the manufacturer or user, like instability of the formulation or difficulties in application. Cellulose fibrils and cellulose in general are stable against temperatures up to 200-300 °C, which makes them a good choice when a temperature stable viscosity modifier is needed. Earlier, we have described how you can achieve a stable viscosity in your formulation with cellulose fibrils in the temperature range of 20-90 °C. This time I would like to discuss what happens when we go over 100 °C, either in wet or dry state.
Cellulose fibrils has shown great potential as an oxygen barrier in packaging. This has led to numerous research projects trying to utilize the potential in practice. But how does the fibrils actually create the barrier towards oxygen?
Water holding capacity, or high water retention value, is often mentioned as a key property of cellulose fibrils. When it is dispersed into water, the fibrils trap water between them and do not release it easily. As a consequence, even rather low concentration of MFC in water has gel-like appearance since the water is not able to flow freely. What is behind this? Let’s try to find out.
Plastic microparticles found in the environment have gotten a lot of attention lately. Many of the plastics are very durable and do not degrade in a reasonable time in the nature, although today there are also biodegradable plastics available. Small pieces of plastic can be found almost everywhere on the Earth and it is not fully understood what kind of consequences that could have for the human beings and environment. Therefore, replacing non-biodegradable plastics with biodegradable materials in packaging, clothes and cosmetics has high focus right now. Cellulose fibrils come from wood or other natural resources; are they biodegradable? Can they replace non-biodegradable plastic and reduce the amount of microplastics in the environment?
Governments around the world are pushing industries to reduce their volatile organic compound (VOC) emissions. VOCs include very different type of chemicals but they may be dangerous to human health and therefore there is a common desire to reduce the use of them. Health effects vary from eye, nose and throat irritation to causing cancer.